PFP Pipe Closer
CE Marked

CE Marked - Astro PFP Intumescent Pipe Closer are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes. Size range 32mm to 315mm.


 

Download the following
Product information

X Series CE Pipe Collars
CE Marked

Fire protection for plastic pipework. New Design with reduced height for tight installations. CE Marked and UL-EU Accreditation. Various sizes available.




Download the following
Product information

PFP FR Pipe Wrap
CE Marked

The PFP FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes. up to 240 minutes for both integrity and insulation.

 


Download the following
Product information

Fire Pipe Wraps
CE Marked

Intumescent pipe wraps for most types of plastic pipes. Sizes 32mm to 200mm diameter. CE Marked and UL-EU Accreditation. Testing through flexible wall and rigid floors and walls.


 


Download the following
Product information

Thermal Fire Sleeve
CE Marked

Pipe Fire Sleeves for Plastic and Metal Pipes. Simple & quick to install, no fixings or sleeving required. CE Marked. 4-in-1 Solution – Fire, Acoustic, Thermal and Vapour Seal.



 

Download the following
Product information

Fire Pillows
CE Marked

Intumescent fire pillows. For temporary (re-useable) or permanent fire protection. Designed to provide an effective fire barrier. CE Marked. UL-EU Accreditation.


 


Download the following
Product information

Duct Sleeve Low Profile
CE Marked

Low profile intumescent duct sleeve for plastic ventilation ducts. Suits wide range of fire partition walls. Easy installation / retrofitting. CE Marked.


 

Download the following
Product information

Duct Sleeve
CE Marked

Fire resistant duct sleeve. Fire protection for plastic ventilation ducts. Up to 120 minutes fire rated. Sleeve can be easily fitted only requiring access from one side. CE.



 

Download the following
Product information

PFP FR Boards
CE Marked

Classified for all types of constructions with or without building service penetrations. Simple and very quick to install. Easy to retrofit additional building services after installation. Once fully cured, the board resists UV, humidity and frost.
 

Download the following
Product information

PFP FR Coating
CE Marked

CE Marked PFP FR Coatings. An ablative sealant coating designed to enhance, seal and fire protect stonewool fibres in PFP FR Boards. Spray directly onto mineral fibres | Non Toxic & Emission Free not harmful to you.
 

 

Download the following
Product information

PFP EX Mortar
CE Marked

The PFP FR EX Mortar is a dry white powder consisting of inorganic compounds and perlite. Simple to apply leaving a very smooth finish. Fully set within 1 hour.
 

 

 

Download the following
Product information

Fire Rated Mortar
CE Marked

A High strength fire resistant mortar. For use on rigid floors or walls. High strength and load bearing properties. Easy to mix and for internal use. Buy online.



 

Download the following
Product information

PFP Putty Pads
CE Marked

CE marked. Fire Reistant Putty. Ideal for sealing around pipes and cables in solid walls and floors. Highly flexible and water resistant. Up to 4 hrs fire resistance.




Download the following
Product information

PFP Putty Cord
CE Marked

Designed to be fitted around service penetrations around very small gaps. Easy to apply fire rated putty. Can be reshaped. Excellent sound insulation.
 




Download the following
Product information

PFP FR Acrylic
CE Marked

Astro PFP FR Acrylic.  Fire Stopping Mastic. Simple to apply with a smooth surface finish. Permanently flexible. High end formula, certified worldwide. Single or packs of 310ml Cartridges.




Download the following
Product information

Fire Rated Batt
CE Marked

Fire resistant board for sealing service penetrations in walls or floors. Suitable for indoor use without additional environmental protection. CE marked.



 

Download the following
Product information

Fire Coat
CE Marked

Fire Resistant Coating - Spray Grade. Suitable for large openings in walls and floors with additional supports. CE Marked & UL-EU Listed.



 



Download the following
Product information

Intu Mastic - Trowel Grade
CE Marked

Astro Intu Mastic - Trowel Grade. Tested with Metallic Pipes, Cables, Cable Bunches, Cable Trays and Cable Ladders. CE & UL-EU Listed. Fire resistance tested in flexible walls, rigid walls and floors.



Download the following
Product information

Fire Rated HPE Sealant
CE Marked

High Pressure intumescent fire stopping sealant. Suitable for use in rigid wall and floors, flexible wall and within batts wall and floor.





Download the following
Product information

Intu Mastic - Fire Rated Mastic
CE Marked

Brown, Grey or Off White. CE Marked : ULEU Accreditation. For sealing gaps around fire doors, linear joints, penetration seals, voids and irregular holes in fire rated structures.



Download the following
Product information

WHOLESALE PRICES
QUICK DELIVERY AVAILABLE
SECURE PAYMENTS
FIRE REPORTS AVAILABLE
WHOLESALE PRICES
QUICK DELIVERY AVAILABLE
SECURE PAYMENTS
FIRE REPORTS AVAILABLE