HS FM Compound - 20kg
CE marked - Synthetic mortar designed to prevent the passage of fire and smoke | High strength, non combustible and can be made load bearing | Fire resistance to EN 1366-3 2009.
HS FM Compound is a one-part synthetic mortar used to seal openings in walls and floors to prevent the passage of fire and smoke. The HS FM Compound is used to reinstate the fire resistance of a wall or floor construction where apertures have been made for multiple services eg . Pipes, Cables trays etc.
It is mixed with water to produce a trowelable or pourable mortar compound. The seal created is high strength and non combustible, with a fire resistance to EN 1366-3 2009 at 100mm thickness and it can be made load bearing.
- Can be reactivated with water to extend the working time.
- Free of halogens, asbestos, fibres & silica and is non toxic.
- Suitable for indoor.
- Not affected by fungus, vermin, rodents and is mould Resistant.
- Long life and ease of use with minimum waste.
- Acoustic insulation properties
- Please Note: Not Suitable for Pizza Ovens / BBQ Bases etc
For more information please download the Product Data Sheet under the Fire Test Reports
Product Size Availability
High Strength Fire Mortar Compound: Bags: 20kg - Colour Off-White
Fire Test Reports
Download the following HS FM Compound Product Data Sheet (PDS), Safety Data Sheet (SDS), Technical Data Sheet (TDS), Declaration of Performance (DoP), Certificate of Constancy of Performance (CoC).
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Intumescent.com (part of the Stormflame Group) has no control over the specific application or installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product based on the products limitation of applications and that the product is fit for purpose for their intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Intumescent.com (part of the Stormflame Group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice. If you are in any doubt as to the suitability of this product for your intended application please contact our technical team on 01329 841 416 or email firstname.lastname@example.org and we will contact you.