About the HS Compound Products
HS (High Strength) Compound is a Gypsum based mortar material used to reinstate the fire resistance performance of floor and wall constructions where apertures exist for the penetrations of multiple services. HS Compound, once cured has excellent load bearing capabilities and can be installed in large span openings.
Please Note: NOT Suitable for Pizza Ovens, BBQ Bases, any types of ovens, fire places etc.
HS Compound can be installed across a variety services and substrates including:
- Rigid Floors
- Rigid Walls
- Multi-Service penetrations
- Blank Openings
- Head of Walls
Advantages:
- Large unsupported spans
- No shrinkage
- Easy to mix
- High strength and load bearing properties
- Versatile workability range
- Provides smoke seal
Areas of Use:
- To reinstate fire resistance through walls and floors
- Multi-Service penetrations
- Loadbearing seals
- Large Span openings
- Prevention of air leakage
- Maintains Acoustic performance
- Assumed working life 25 years
- For internal use
For more information please download the Product Data Sheet under the Fire Test Reports
Product Size Availability
High Strength Fire Mortar Compound: Bags: 20kg - Colour Off-White
Installation
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@intumescent.com.
Maintenance
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.
Competency
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Additional Notes:
Please refer to the ETA/UL-EU sheet for fields of application for this product. For further information on installation requirements please refer to the manufacturer of the services and the wall/floor specification to ensure the compatibility of this product, if in doubt please contact the technical team with services and wall/floor specification on Tel: +(0)1329 841416 or email sales@intumescent.com.
Fire Test Reports
Download the following HS Compound Product Data Sheet (PDS), Safety Data Sheet (SDS), Technical Data Sheet (TDS), Declaration of Performance (DoP), Certificate of Constancy of Performance (CoC), European Technical Assessment Sheet (ETA) & UL Documentation (UL).
HS Compound Product Data Sheet
HS Compound GB Safety Data Sheet
HS Compound NI Safety Data Sheet
HS Compound EU Safety Data Sheet
HS Compound DoP Sheet
HS Compound CoC Sheet
HS Compound ETA Sheet
HS Compound UL Documentation
We only sell and deliver goods in the Mainland UK and NI - unless you have made a prior arrangement with us. For delivery to the following postcodes starting with: IM, HS, ZE, JE, GY, KW, FK, PH33 or AB please contact us on 01329 841 416 or sales@intumescent.com for all enquiries.
Delivery charges are flat rate whatever quantity of goods you buy.
Current delivery charges (excluding VAT) are:
- £12.50 for Express Delivery (Typically 1-2 days)**
- £25.00 for AM Delivery**
- £34.75 for N. Ireland 3-5 Working Days (Monday to Friday)
** "Express & AM Delivery" applies to the normal work days, Monday to Friday, and assumes in stock orders are placed before 14:00 on a week day. For Scottish and highlands locations deliveries can take up to 3 days. For URGENT delivery enquiries please contact us.
Track your delivery
All products bought from us are tracked and you can check the progress of your delivery by contacting one of our friendly team members on
01329 841 416 or
sales@intumescent.comYou are required to sign for your order and we cannot leave items without a signature unless by prior arrangement. (Please note we cannot accept any liability for any shortage and/or damage if goods are left at your request).
Got some comments about our products or your recent purchase please send us an email and we will add it to this website:
sales@intumescent.com